Page 1
ENGLISH Congratulations on purchasing your TriPollar Stop X device! ® You have taken the first step toward flawless beautiful skin! This user manual describes the TriPollar Stop X product and how to use it. ® Supplementary information to be found at: http://www.stop-age.com (English website) http://www.stop-age.cn (Chinese website)
TABLE OF CONTENTS ® INTRODUCING TRIPOLL AR STOP X • OVERVIEW ® • THE TRIPOLL AR STOP X KIT USING TRIPOLL AR ® STOP X ® • THE TRIPOLL AR STOP X DEVICE • BEFORE YOU BEGIN • TRE ATING YOUR SKIN •...
Page 3
Manufactured by Pollogen Ltd. Patented technology. The names Pollogen, TriPollar and Stop are registered trademarks of Pollogen Ltd. All intellectual property rights in this publication are owned by Pollogen Ltd. and protected by applicable copyright laws and international treaty provisions.
Page 4
SAFETY Important: Be sure to read the entire user manual prior to use of the product. Always adhere to all warnings and cautions. Be sure to follow all safety precautions below when using the TriPollar Stop X product. ® To learn more about TriPollar technology, visit our English website at: www.stop-age.com and Chinese website at: www.stop-age.cn WARNINGS AND CAUTIONS TriPollar...
Page 5
• Use TriPollar Preparation Gel during treatment according to its instructions ® for use. SAFETY INSTRUCTIONS • Only use this device for its intended purpose, as described in this manual. • Do not use the device over eyelids, closed eyes, thyroid area, lips, ears, breasts or genital areas.
Page 6
• Have any active skin condition within the treatment area, such as sores, psoriasis, eczema or a rash. • Have a history of keloid scarring, abnormal wound healing or fragile skin. • Have had any surgical procedure, laser resurfacing or deep chemical peeling within the treatment area within the past three months or are still undergoing a process to complete healing.
Page 7
POSSIBLE SIDE EFFECTS The following side effects are rare. However, should they occur, they are usually temporary. If any of the following conditions appear and last more than 24 hours, consult your physician: • Pain • Damage to natural skin texture (crusting, blistering, burns, fragile skin, bruising) •...
® INTRODUCING TRIPOLLAR STOP X This chapter introduces the TriPollar Stop X product and describes ® its components. OVERVIEW TriPollar Stop X – The Next Generation of RF Home Treatments ® TriPollar Stop X presents the latest in RF technology at the comfort of your ®...
® THE TRIPOLLAR STOP X KIT ® The TriPollar Stop X kit contains the following components: ® 1. TRIPOLLAR STOP X KIT (FIG.1) STOP X FIG.1...
Page 10
® 2. TRIPOLLAR STOP X DEVICE (FIG.2) ® 3. TRIPOLLAR STOP X POWER SUPPLY AND ELECTRIC CORD (FIG.3) ® 4. TRIPOLLAR STOP X ELECTRICAL OUTLET ADAPTERS (FIG.4) ® 5. TRIPOLLAR PREPARATION GEL (FIG.5) After the container has been opened, the gel can be used for up to 12 months. Important: It is recommended to perform a patch test 24 hours prior to initial use.
® USING TRIPOLLAR STOP X ® This chapter describes the TriPollar Stop X device and how to use it. THE TRIPOLLAR ® STOP X DEVICE TriPollar Stop X is a facial renewal and rejuvenation device. The device ® is used to increase and accelerate collagen production in your skin for rejuvenation effect.
Page 12
FIG.8 Shows the components comprising the TriPollar Stop X device. ® FIG.8 1. DEVICE BODY 2. TREATMENT HEAD 3. ELECTRODE 4. TEMPERATURE SENSOR 5. CONTROL PANEL 6. POWER SUPPLY CONNECTION 7. GREEN INDICATOR LIGHT 8. ORANGE INDICATOR LIGHT 9. ON/OFF BUTTON 10.
BEFORE YOU BEGIN Before using the TriPollar Stop X device, do the following. ® 1. Open the box containing the device, and remove the device and its power supply. 2. Insert the adapter onto the electrical posts (Fig.9) 3. Push the adapter into the slot of the PS until it securely "clicks into place" and cannot be removed easily (Fig.10) 4.
TREATING YOUR SKIN To treat your skin using the TriPollar Stop X device: ® 1. Cleanse and dry the treatment area. 2. Apply a very thin, even layer of TriPollar Preparation Gel over the entire ® treatment area (face and/or neck). This gel must be used during the entire treatment session.
Page 16
HIGH RF LOW RF FIG.13 FIG.14 FIG.15 Important: During your first treatment session, we recommend that you use the Low power setting and then adjust the power level according to your skin’s tolerance for subsequent treatments. Treatment: 5. Divide the face to 3 optional treatment areas (Fig.16): Right cheek ...
Page 17
Important: Be sure to constantly move the device slowly over the skin to ensure proper heating of the treated area. Do not leave the device on one place without movement. 8. Once the orange indicator light illuminates followed by a 'beep' sound, you have reached the optimal temperature.
Page 18
11. As a natural result of the treatment, the skin may show some redness (erythema) and minor skin swelling (edema) in the treatment area. Both should disappear after a short time. 12. Press the Power button for two seconds to turn the device OFF. 13.
RECOMMENDED TREATMENT GUIDELINES The following treatment guidelines are recommended for using the TriPollar Stop X device: ® • Treating the entire face takes 12-15 minutes. For shorter treatment times focus on selected areas of concern. Treatment times differ for each person.
TROUBLESHOOTING This chapter describes how to troubleshoot problems that may arise when using the TriPollar Stop X device. ® If your TriPollar® Stop X device is not working, take the following steps before contacting the service center: • Ensure that you have removed the device’s protective cover. •...
APPENDIX This appendix provides the hazardous materials declaration for the TriPollar Stop X device. ® Restriction of Hazardous Substance Material Declaration TABLE 5 - IS IN ACCORDANCE WITH THE PROVISIONS OF SJ/T 11364 Hazardous Substances Part Name PBDE • • •...