External Microphone - Akaso Brave 6 Plus User Manual

MAXIMIZING BATTERY LIFE
If the battery reaches 0% while recording, the camera saves the file and powers off.
To maximize battery life, follow these guidelines when possible:
• Turn off Wireless Connections
• Capture video at lower frame rates and resolutions
• Use Screen Saver setting.
BATTERY STORAGE AND HANDLING
The camera contains sensitive components, including the battery. Avoid exposing
your camera to very cold or hot temperatures. Low or high temperature conditions
may temporarily shorten the battery life or cause the camera to temporarily stop
working properly. Avoid dramatic changes in temperature or humidity when using
the camera, as condensation may form on or within the camera.
• Do not dry the camera or battery with an external heat source such as a
microwave oven or hair dryer. Damage to the camera or battery caused by contact
with liquid inside the camera is not covered under the warranty.
• Do not store your battery with metal objects, such as coins, keys or necklaces.
If the battery terminals come in contact with metal objects, this may cause a fire.
• Do not make any unauthorized alterations to the camera. Doing so may
compromise safety, regulatory compliance, performance, and may void the
warranty.
WARNING: Do not drop, disassemble, open, crush, bend, deform, puncture, shred,
microwave, incinerate or paint the camera or battery. Do not insert foreign objects
into the battery opening on the camera. Do not use the camera or the battery if it
has been damaged for example, if cracked, punctured or harmed by water.
Disassembling or puncturing the battery can cause an explosion or fire.
17

EXTERNAL MICROPHONE

Brave 6 Plus supports connecting an external microphone (sold separately) to
achieve improvement over sound quality, please connect the external microphone
via the USB-C port.
REMOTE
VIDEO
To record Video, verify the camera in Video mode.
To start recording:
Press the Grey Video Button. The camera will emit one beep and the camera light
will flash while recording.
To stop recording:
Press the Grey Video Button again. The camera will emit one beep and the camera
light will stop flashing while recording.
PHOTO
To capture a photo, verify the camera in Photo mode.
To take a photo:
Press the Red Photo Button. The camera will emit a camera shutter sound.
Photo Button
Video Button
Splashproof only, not waterproof
18