Table of Contents
Advertisement
To turn on the TV to a specific channel at a
specific time, use the On-Timer. Before you
begin, set the clock correctly. Details are on
page 18.
Press MENU to see the main menu.
Press OH+ or OH- to highlight Time.
Press OK to enter the Time submenu.
Press OH+ or OH- repeatedly to highlight
TV/CATV.
Press VOL+ or VOL- to select TV or CATV,
depending on whether you have Cable TV
service or not. Details are on page 11.
Press OH+ or OH- repeatedly to highlight
Channel.
Press VOL+ or VOL- to enter the channel
number. This will be the channel to which
the TV turns on at the specified time.
Press OH+ or OH- repeatedly to highlight
On Time.
Press VOL+ or VOL- to select Once, Daily,
or Off.
If you select Once, the timer will turn on the
TV one time within the next 24 hours only.
If you select Daily, the timer will turn on
the TV at the same time and to the same
channel every day.
Choose Off to cancel the On-timer.
0 Press OH+ or OH- repeatedly to highlight
0:00 under the line of On Time.
't
Press VOL+ or VOL- to enter the on time.
Hold down VOL+ or VOL- to change the
time quickly in 10 minute increments; press
OK. The hour is highlighted. Use VOL+ or
VOL- to set the hour. This will be the time
at which the TV will turn itself on.
2
Press MENU repeatedly to exit the menu
or the menu will automatically disappear
within a few seconds if no buttons are
pressed on the remote control.
Models 20V412T and 20V500T: If you have
one of these models you won't see the
Sound menu and your remote will not have
the MTS or SOUND buttons.
Picture
Time
TV/CATV
CATM
On Time
Once
AM11:30
19
Advertisement
Table of Contents
