Adding Or Erasing Channels - RCA CRT Television User Manual

You can add or erase channels from the list in
the TV's memory.
Press MENU to see the main menu.
Press CH+ or CH- to highlight Setup.
Press OK to enter the Setup submenu.
TV/CATV is highlighted. Press VOL+ or
VOL- to select TV or CATV (whichever
you have). Details are on page 11.
Press CH+ or CH- repeatedly to
highlight Channel.
Press VOL+ or VOL- to enter the
channel number you want to add or
erase.
Press CH+ or CH- repeatedly to
highlight Add/Erase.
Press VOL+ or VOL- to choose Add or
Erase.
If you select Add, the channel will be
available when you press CH+ and CH-
to move through channels.
Choosing Erase will remove the channel
from the TV's memory. The channel will
not be available when you flip through
channels with the CH+ and CH- buttons.
Press MENU repeatedly to exit the
menu or the menu will automatically
disappear within a few seconds if no
buttons are pressed on the remote
control.
t0 You won't see the change take effect
until you scroll through the channels in
memory using the CH+/- buttons.
Models 20V412T and 20V500T: If you
have one of these models you won't see
the Sound menu and your remote will not
have the MTS or SOUND buttons.
You cannot select the Setup
menu if the TV is set to a video
input channel (FRNT). Press
INPUT repeatedly to get to
regular TV programming.
Picture
Add/Erase Erase
Add/Erase Add
15