Related Manuals for Pergola kits USA SANTA FE
Summary of Contents for Pergola kits USA SANTA FE
- Page 1 800-403-9259 (Toll Free) Assembly instructions for: SANTA FE PAVILIONS Santa Fe Pavilions www.pergolakitsusa.com...
- Page 2 Depending on size Hardware: Bolts and deck Deck Screws Bolts, washers and nuts screws Hurricane anchors Anchors (U brackets, Gale Wind (if you ordered) or hurricane anchors) Gale Wind brackets Ceiling Fan base (if chosen) www.pergolakitsusa.com Santa Fe Pavilions...
- Page 3 Note: print the drawings that you approved before start the construction, they are needed to see the distances between the posts. Step 1. Attach the post to the ground. There are different ways to do it. Please see the How to anchor your pergola document. Santa Fe Pavilions www.pergolakitsusa.com...
- Page 4 This beam must be in the interior of the support and bolted after you attach the supports to posts as shown below: Attach with carriage bolts, washers and nuts. The quantity of bolts depends on supports length. Beam between the supports Santa Fe Pavilions www.pergolakitsusa.com...
- Page 5 Repeat this step with the other end arched rafter. 4 ½”x 5/16” Bolt, washers & nut. 8”x 3/8” Bolt, washers & nut. Santa Fe Pavilions www.pergolakitsusa.com...
- Page 6 (default rafter spacing is 24” on center unless custom ordered differently). Start at one end and attach one rafter at a time from both sides and on both ends before moving to the next rafter. And repeat the process in all arched Rafters. Santa Fe Pavilions www.pergolakitsusa.com...
- Page 7 This completes the pavilion assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't hesitate to call us (800-403-9259) or email us. We are here to support you. Santa Fe Pavilions www.pergolakitsusa.com...