Removal & Replacement
Remove Crank
Tools Required:
Crank Puller
Crescent Wrench
Block of wood
Step 1.
Place block of wood under moving
Arm assembly to prebvent counter-
clockwise rotation. Note position of
block of wood to the left of the tray.
Step 2.
Place 15mm socket end of crank
Puller over axle nut. Loosen the axle
Nut by turning the crank puller counter-
Clockwise with a crescent wrench.
Step 3.
Remove crank assembly from hub.
Copyright 2001 True Fitness Technology, Inc.
Step 1. Wood Block Placement.
Step 2. Axel Nut Removal.
Step 3. Remove Crank Assembly from Hub.
600
Page 37