Advertisement
•
Undo the Velcro™ at the bottom of the PFD, exposing the bottom pleat (or gusset)
•
Tie the orange lanyard to the small loop located in the bottom pleat, towards the back of the PFD,
behind the lifting loop. Make sure to tie the lanyard off a short as possible, taking up all the slack in
the lanyard when the sides and bottom of the PFD are folded in (Fig. 3)
NOTE: In order for the S20 to be activated by the PFD inflation the lanyard needs to be as short as
possible without affecting the shape of the PFD when it is full packed
•
Tie the end of what remains of the lanyard to the white portion of the S20. This will secure the S20
to the PFD in the event that the S20 is freed from the attachment tab (Figure 4). Leave plenty of
slack in this section of the lanyard to ensure it does not pull the S20 when the PFD is inflated. Insert
the whistle on the tab, beside the S20.
Advertisement
