Cisco Catalyst 9800-40 Installing page 11

Installing the Controller
2 Cable-management bracket screw
Use the package of screws that came with your chassis containing four screws.
Note
The following figure shows where to attach the cable-management brackets to the .
Figure 7: Attaching the Cable-Management Brackets to the
1 Cable-management bracket "U" feature
2 Cable-management bracket screw holes
Step 3 Insert the cable management screw into the screw hole of the cable-management bracket and into the chassis rack-mount
bracket and tighten the screw using a Philips screwdriver.
Step 4
Repeat step 1 to step 3 for the other side of the chassis.
Attaching the Cable Management Bracket
3 Chassis front rack-mount bracket
Installing the Controller
11