Mode 1: Ps4 Mode; Shortcut Buttons - Nacon REVOLUTION Pro Controller 3 Instruction Manual

EN /
2/ Mode 1: PS4™ Mode
PS4™ Mode is selected by moving the 'Mode' switch to position 1.
I In this mode the controller supports the following features:
- Motion sensors
- Touch pad
- Dual vibrations
- 3.5mm headset jack
- PS, SHARE and OPTIONS buttons
- L1 and R1 shoulder buttons
- L2 and R2 analogue triggers
- Left stick with L3 button
- Right stick with R3 button
- 8-way directional pad
- Action buttons

- Shortcut buttons

I Shortcut buttons
You can remap any button (excluding PS, SHARE, OPTIONS and touch pad
buttons) to the shortcut buttons as follows:
- Press and hold the Profile button for 3 seconds. The blue halo around the right
stick will pulse.
- Press on the shortcut button you want to assign. The corresponding LED will
turn ON. LED1 for S1 /LED2 for S2 / LED3 for S3 / LED4 for S4.
- Then press on the button that you want to assign to the Shortcut button. The
LED will flash 3 times to confirm the mapping is successful.
- Press and hold the Profile button for 3 seconds to confirm and quit the remap-
ping function.
NOTE: The REVOLUTION Pro Controller 3 does not feature a built-in speaker or light bar.