U2922A Terminal Block Installation - Keysight U2751A User's And Service Manual

1 Getting Started

U2922A Terminal Block Installation

This section provides the recommended procedure for connecting the U2922A
terminal block to the U2751A.
WARNING
– You are required to connect the cables to the U2922A terminal block prior to
NOTE
– Ensure that you power-off your device and unplug the U2922A from the
30
– The maximum working voltage of the U2751A with the terminal
block for standalone is 35 Vrms and for modular (when used
with the U2781A) is 180 Vrms.
– The maximum transient voltage is 300 Vrms.
– Do not remove the retractable cover from the U2922A terminal
block during operation to avoid any unexpected hazard.
attaching the U2922A to the U2751A.
U2751A to change the cable connection on the U2922A.
cables
Connect the cables to the terminal block as
desired.
Keysight U2751A User's and Service Guide