Inspection And Maintenance; Initial Inspection; Electrical Check; General Maintenance - Keysight U2751A User's And Service Manual

1 Getting Started

Inspection and Maintenance

Initial Inspection

When you receive your U2751A, inspect the unit for any obvious damage such as
broken terminals or cracks, dents, and scratches on the casing that may occur
during shipment. If any damage is found, notify the nearest Keysight Sales Office
immediately. The front of this manual contains the warranty information.
Keep the original packaging in case the U2751A has to be returned to Keysight in
the future. If you return the U2751A for service, attach a tag identifying the owner
and model number. Also include a brief description of the problem.

Electrical Check

Chapter
procedure. The procedure will verify to a high level of confidence that the U2751A
is operating in accordance with its specifications.

General Maintenance

Any repair that is not covered in your modular product manuals should only be
NOTE
performed by qualified personnel.
1 Power off your module and remove the power cord and I/O cable from your
2 Remove your module from the bumper casing.
3 Shake off any dirt that may have accumulated on the module.
4 Wipe your module with a dry cloth and install the bumper back in place.
24
4, "Service Information"
device.
on page 45 will provide the complete verification
Keysight U2751A User's and Service Guide