Getting Started; Introduction - Keysight U2751A User's And Service Manual

1

Getting Started

Introduction

The U2751A USB Modular Switch Matrix offers a high quality, low cost switching
solution for automated test. It can operate as a standalone or modular unit when
used with the U2781A USB modular instrument chassis.
The U2751A is a compact 4×8, two-wire modular switch matrix which is controlled
remotely over a USB interface via the Keysight Measurement Manager software.
The U2751A can also be programmed using the provided drivers or via SCPI
commands.
The U2751A has the following features.
– 32 two-wire cross-points organized in a 4 rows by 8 columns configuration
– any combination of rows and columns can be connected at a time. Multiple
– relay cycle counter
The U2751A offers you the most flexible connection path between your device
under test (DUT) and your test equipment, allowing different instruments to be
connected to multiple points on your DUT at the same time.
Using the Keysight Measurement Manager, you can instruct the matrix to make or
break any of the 32 row-column intersections over the USB interface. More details
will be covered in the Keysight Measurement Manager help file.
18
channels can be closed at the same time
Keysight U2751A User's and Service Guide