Troy-Bilt PRO LINE 644HMBRONCO Operator's Manual page 30

MODELS 644H & 645A
1
2
3
/
REF
NO.
1 GW-9517
2 GW-1714
3 GW-50043
4 711-04110
5 GW-1224-1"
GW-1224-2"
GW-1224-3"
GW-1224-4"
-- GW-13250
PARTNO. DESCRIPTION
Snap Ring
Bearing,Tapered Roller (with race)
Support Washer, Rear
Drive Shaft (ORT)
Shim, RearBearing Oap,.010"thick
Shim, same as above, except .030"thick
Shim, same as above, except .005"thick
Shim, same as above, except .062"thick
Shim Set (Incl. the following shims:
two #1224-1, two 1224-2 & one#1224-4)
* Useas required to obtain between .005" and .015" allowable end-play.
30