Page 1
OPERATING INSTRUCTIONS MULTI CHANNEL MONITOR MP-1216 TOA 1000 series LIGHTNING FLASH WITH ARROWHEAD WITHIN A TRIANGLE IS INTENDED TO TELL THE USER THAT PARTS INSIDE THE PRODUCT ARE A CAUTION RISK ELECTRIC SHOCK TO REDUCE THE RISK OF ELECTRICAL PERSONS.
Page 2
Do not install the MP-1216 in locations which are subject to corrosive chemicals or salt water. Also, keep your beverages away from the unit. To avoid electric shocks, do not touch the unit's internal components. Always refer the servicing to your TOA dealer.
Page 3
NOMENCLATURE [Rear Panel] When connecting two units, set the switch of a AC Fuse Holder master unit to MASTER position, and the switch When replacing the fuse, be sure to use the of a slave unit to SLAVE position. same type as that supplied with the MP- 1216, and having the following rating: Input Terminals (1 ~16) Fuse Rating :...
Page 4
Rack mounting screw × 4 Warranty card (for USA and Canada) × 1 Instruction manual × 1 Jumper strip × 16 * 0 dB = 0.775 Vrms * Specifications are subject to change without notice. Printed in Japan TOA Corporation 133-12-227-5A...
Need help?
Do you have a question about the 100 Series and is the answer not in the manual?
Questions and answers