Step 2: Pairing With Your Wireless Access Point - TELUS Optik TV Self-Install Manual

Step 2: Pairing with your wireless access point

Step 2: Pairing with your wireless access point
When the screen on the right
2a
appears, press the OK button
on your Optik TV remote.
Follow the instructions on
screen, press and hold the
button on the front of your
wireless access point for
2b
10 seconds and let go.
The lights on the device will
flash indicating that pairing
is in progress.
A screen will appear indicating that pairing
was successful (it may take a few minutes).
You are now ready to watch TV.
2c
For additional support and troubleshooting,
visit telus.com/selfinstall.
OK
Press and hold
for 10 seconds
Wireless
access point
3