English HEAVY-DUTY CHIPPING HAMMER D25872 Congratulations! EC-Declaration of Conformity You have chosen a D WALT tool. Years of experience, thorough Machinery Directive product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data...
English Denotes risk of electric shock. of inattention while operating power tools may result in serious personal injury. Denotes risk of fire. b ) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, General Power Tool Safety Warnings non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
English account the working conditions and the work to be around a spinning bit may cause personal injury and loss performed. Use of the power tool for operations different of control. from those intended could result in a hazardous situation. WARNING: We recommend the use of a residual current 5) Service device with a residual current rating of 30mA or less.
English Active Vibration Control (AVC) System • Check for damage to the tool, parts or accessories which may have occurred during transport. For best vibration control, hold the tool as described in Proper • Take the time to thoroughly read and understand this manual Hand Position and apply just enough pressure so the damping prior to operation.
Page 9
English Proper Hand Position (Fig. D) Mounting the Side Handle Assembly (Fig. B) 1. Widen the ring opening of the side handle 2 WARNING: To reduce the risk of serious personal injury, by rotating the screw for side handle mounting ALWAYS use proper hand position as shown.
English 5. Depress the ON/OFF rocker switch 1 6. To stop the hammer, release the ON/OFF rocker switch. MAINTENANCE Your D WALT power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
Page 12
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)