Connecting The Camcorder To Tv - AIPTEK AHDZ700 User Manual

Connecting the camcorder to TV

Please follow the below instructions to connect your camcorder and
TV via accessory AV cables for real-time display. You can display your
video clips and still pictures on your TV, sharing them with your friends
and family.
Connecting the camcorder to HDTV
HD TV hereby means the HDTV built-in component input ports, thus can perform
HD high resolution quality while connected.
1. Turn on your HD TV.
2. Turn on the Camcorder.
3. Plug one end of the component video cable into the (Component
Video IN) port on the HDTV and the other end into the (HD OUT) port
on the Camcorder.
4. Plug one end of the other AV cable into the (Component Audio IN) port
on the HDTV and the other end into the (AV) port on the Camcorder.
(Please do not plug in the yellow connector to the HDTV's AV-IN.)
5. Press the input switch mode on the HDTV and select "Component
Input".
If you record an HD resolution clip while connected to your HD TV, the TV
display video resolution will down size to WVGA resolution due to data bit
rate, but the recorded file will remain HD with no change.
The HD TV will display your video clips in 1080i (60 fields) resolution mode
although it is recorded in 1080P (30 frames) setting.
 
Component Video in
(red)
(white)
AV
(yellow)
<AV cable>
HD OUT
(Do not plug in Yellow Cable)
<Component Video cable>
HD TV
Component Audio in
(green)
(blue)
(red)