Installing The System Board - Discrete - Dell Latitude 3510 Service Manual

9. Remove the two (M2x4) screws from the system board and the two (M2x5) screws holding the metal shield. Then lift and flip the
board downward.
10. Disconnect the cable that is connected to the daughterboard and lift and move the system board away from the computer.

Installing the system board - Discrete

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the system board and provides a visual representation of the installation procedure.
56 Disassembly and reassembly