VocoPro Digital Quad Conference Owner's Manual page 10

Getting Connected
3. Simply Turn the Microphone on by pressing the power switch.
• Look for an illuminated RF led on the main receiver, this indicates that the Digital Quad
Conference microphone has paired successfully.
• Speak into the microphone and verify that the AF LED light flashes for the
corresponding connected channel.
Your Digital Quad Conference is now connected to your Digital-Quad-Play.
Microphone Placement
• Aim the microphone toward the desired sound source, such as the talker.
• Do not aim the microphone toward a loudspeaker.
• Place the microphone within 20cm~40cm (8-16inch) of the person speaking
POWER
10