Assembly & Set-Up - Troy-Bilt 460 Series Operator's Manual

Assembly & Set-Up
Contents of Carton
• One Lawn Mower
• One Grass Catcher
• One Side Discharge Chute
Assembly
NOTE: This unit is shipped without gasoline or oil in the engine.
Fill up gasoline and oil as instructed in the accompanying engine
manual BEFORE operating your mower.
Handle
1. Remove any packing material which may be between
upper and lower handles.
a. Pull up and back on upper handle as shown in Fig.
3-1. Make certain the lower handle is seated securely
into the handle mounting brackets. Do not crimp
cables while lifting the handle up.
B
b. Tighten star knobs to secure upper handle to lower
handle. Make sure that each carriage bolt is seated
properly in the handle.

• One Lawn Mower Operator's Manual
• One Engine Operator's Manual
A
Figure 3-1
• One Bottle of Oil
• One Hardware Pack
2. Insert a carriage bolt from the hardware pack into the
upper hole on the handle mounting bracket. Secure with
one plastic wing nut, also included in the hardware pack.
Repeat on other side with remaining items from hardware
pack. See Fig. 3-2.
Wing Nuts ()
Figure 3-
3
Hardware Pack
Carriage Bolts ()