Figure 9
RemovingGrassCatcher
•
Lift the rear discharge door on the mower.
•
Lift the grass catcher up, out of the slots in the
handle bracket assemblies.
•
Reinstall the plastic rear baffle.
•
Release the rear discharge deer.
WARNING:
Never operate the mower
Jnless the hooks on the grass catcher are
_eated in the slots on the handle bracket
assemblies, and the rear discharge deer rests
firmly against the top ef the grass catcher.
Converting to SideDischarge
•
Your mower has been shipped as a mulcher. Te
convert it to a side-discharge mower, lift the
mulching plug. Slide the two hooks en the side_
discharge deflscter under the hinge pin en the
mulching plug assembly. Lower the mulching plug.
See Figure "10.
•
De net remove the side mulching plug at any time,
even when you are not mulching.
Mulching
Plug
Pin
(Side
"-Chute
Deflector
Figure 10