Additional Digitizing Information - Brother PRCL1 User Manual

g
Secure the embroidery frame holder with
the two thumb screws.
1
Use the thumb screws included with the
embroidery machine (thumb screws removed
a
in step on page 5).
Memo
● Using the disc-shaped screwdriver included
with the embroidery machine, firmly tighten
the thumb screws.
14
a
Additional digitizing
information
In order to prevent pattern misalignment due to
wrinkled or stretched fabric, observe the following
precautions when creating embroidery data for the
cylinder frame.
a
Sew underlay stitches.
b
Specify the sewing order and sewing
direction to start at the center of the
embroidery pattern and sew toward the left
and right sides.
With this embroidery machine, the order in
which patterns are selected when they are
combined is the order in which they will be
sewn.
For the following example, select the patterns
in the order "E" -> "A" -> "B" -> "R" to make
the combined pattern "BEAR".
Incorrect
sewing
order
Correct
sewing
order
Note
● Do not sew from one end to the other,
otherwise wrinkling or shrinkage may
occur.