Table of Contents
Advertisement
Speaker Volume
1. Turn the knob clockwise to turn the speaker ON
2. Turn the knob clockwise to raise the volume. Turn the knob counter-clockwise to lower the volume
Speaker + Base Pairing
1. Place the speaker and base within close range of each other
2. Press "PAIRING" on both the speaker and base to pair
Playing Line-In Music
1. Place the speaker and base within close range of each other
TROUBLESHOOTING
No sound from the receiver
Check all connections to ensure that all cords are firmly connected at the back of the base and TV. Also confirm that the receiver is no more
than 100 feet away from the base
There is sound from the TV speaker, but no sound from the receiver
Check your TV speaker setting by going into the TV Menu using your remote. Make sure the TV is sending audio signals to the base
The Low Battery/Charging Indicator keeps blinking on the receiver
This indicates that the battery is low and needs to be placed on the base for recharging. When fully charged, the blinking will stop (in
approximately 3 hours). If the blinking does not stop, check to make sure the receiver is firmly connected and properly aligned with the base.
Plug your headphones into the headphone jack. No sound will be emitted from the speakers. Adjust the headphone volume by rotating the
volume knob
CLEANING AND MAINTENANCE
Unplug the AC Adapter from the wall. Then, use a dry, soft cloth to clean and dust the outside
surfaces and the charging contacts on the base. Do not immerse the receiver in water.
- 8 -
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 207072 and is the answer not in the manual?
Questions and answers