Sharper Image 204518 Owner's Manual

Thank you for purchasing the Sharper Image Bluetooth Diamond Speaker.
Please take a moment to review these instructions and retain them for future reference.
CHARGING THE SPEAKER
• To charge Speaker:
• Insert one end of USB cable into PC or any
standard USB power adaptor.
• Insert other end of USB cable into USB Charging
Port on speaker.
• Red Indicator Light means Speaker is charging.
Light dims when fully charged.
• "Di Di Di" prompt every 30 seconds indicates
battery is low.
PARTS IDENTIFICATION AND FUNCTIONS:
1. Hands-Free Button
• In Bluetooth mode:
• Press Button to pause and play music.
• When a phone call is incoming, voice
prompt will say "Incoming Call."
• To answer call: Short-press the Hands-
Free Button.
• To refuse call: Long-press the Button.
• To hang up call: Short-press the Button.
• To callback last number: Long-press the
Button twice.
2. Microphone
3. USB Charging Port
4. Play/Pause Button
• I n Bluetooth mode, press Button to pause
and play music.
BLUETOOTH DIAMOND SPEAKER
Item No. 204518
Owner's Guide
5. Power Switch
6. Previous Song/Volume Down Button
• When connected via Auxiliary Line-In
Port: Press Button to decrease volume.
"Di Di Di" sound indicates minimum
volume.
• When connected via Bluetooth:
• Long-press of Button decreases volume.
• Short-press returns to the previous song.
• Note: Default volume is set to 70%
7. Auxiliary Line-In Jack
8. Next Song/Volume Up Button
• When connected via Auxiliary Line-In
Port: Press Button to increase volume. "Di
Di Di" sound indicates maximum volume.
• When connected via Bluetooth:
• Long-press of Button increases volume.
• Short-press advances to the next song.
9. Indicator Light
• What the Indicator Light means:
• Rapidly flashing blue: Searching for
Bluetooth connection.
• Slowly flashing blue: Bluetooth
connection established.
• Solid red: Speaker is charging or in Line-
In state.
• Note: When charging, red light will dim
when fully charged.