Sharper Image 207072 User Manual

Sharper Image 207072 User Manual

Wireless tv speaker
Hide thumbs Also See for 207072:

Advertisement

WIRELESS TV SPEAKER
Item No. 207072
User Guide
Thank you for purchasing the Sharper Image Wireless TV Speaker.
Please take a moment to read this guide and store it for future
reference.
- 1 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 207072 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sharper Image 207072

  • Page 1 WIRELESS TV SPEAKER Item No. 207072 User Guide Thank you for purchasing the Sharper Image Wireless TV Speaker. Please take a moment to read this guide and store it for future reference. - 1 -...
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Please read these instructions carefully before using this device. • Always keep this device dry. Do not immerse in water • For your safety, do not attempt to open the unit of battery compartment. Attempting to open the battery compartment violates your warranty •...
  • Page 3: Identification Of Parts

    IDENTIFICATION OF PARTS 1. DISPLAY 2. SPEAKER OFF AND VOLUME ADJUSTMENT 3. RADIO FREQUENCY AND TIME SET MINUS ( - ) 4. RADIO FREQUENCY AND TIME SET PLUS ( + ) 5. SETTING 6. FM RADIO 7. BUILT-IN SPEAKERS 8. POWER INPUT ( SPEAKER ) 9.
  • Page 4 DISPLAY 1. Battery charging: Icon shows when the speaker is charging. 2. AM: Icon displays when the time shows in 12-hour format, and in AM (morning) 3. PM: Icon displays when the time shows in 12-hour format, and in PM (afternoon/evening) 4.
  • Page 5: Connection And Setup

    CONNECTION AND SETUP Select an Audio Connection: Locate the audio out connector on the back of your TV, or the headphone jack. Analog Audio Output: For analog audio output, use the included audio cable. Headphone Jack: You may also connect the Wireless TV Headphones via your TV’s headphone jack. Use the provided audio cable and connect the base of the speaker to your TV as shown below.
  • Page 6 PLACEMENT OF TRANSMITTER BASE For best results, place the Transmitter Base on top of your TV stand, or on top of your TV (as shown below). TV OR CABLE BOX AUDIO-OUT RCA Y ADAPTER CABLE RED CABLE TO OTHER AUDIO DEVICES RCA Y ADAPTER CABLE WHITE...
  • Page 7: Battery Charging

    BATTERY CHARGING Place the receiver on the base for charging for 6+ hours before first use. During charging, the Battery Charging icon is ON. When it is fully charged, the Battery Charging icon is OFF. A fully-charged battery will give you up to 5 hours of listening time. When the speaker is powered by battery, the battery icon is ON.
  • Page 8: Troubleshooting

    Speaker Volume 1. Turn the knob clockwise to turn the speaker ON 2. Turn the knob clockwise to raise the volume. Turn the knob counter-clockwise to lower the volume Speaker + Base Pairing 1. Place the speaker and base within close range of each other 2.
  • Page 9: Specifications

    SPECIFICATIONS Transmission: 2.4 GHz Radio Frequency Speakers: 2x5W Speaker Battery: Built-in (Lithium-ion) Audio Format Support: LPCM 44kHz, 96kHz Operating Range: 100 ft. (in an open area) AC Adapter Power: 100-240VAC/50-60 Hz input; 9VDC 1.5A output Listening Time: Approximately 5 hours (at 50% volume) Dimensions: 9”...
  • Page 10: Warranty / Customer Service

    WARRANTY / CUSTOMER SERVICE Sharper Image branded items purchased from SharperImage.com include a 1-year limited replacement warranty. If you have any questions not covered in this guide, please call our Customer Service department at 1 (877) 210-3449. Customer Service agents are available Monday through Friday, 9:00 a.m.

Table of Contents

Save PDF