Connection And Setup - Sharper Image 207072 User Manual

CONNECTION AND SETUP

Select an Audio Connection:
Locate the audio out connector on the back of your TV, or the headphone jack.
Analog Audio Output:
For analog audio output, use the included audio cable.
Headphone Jack:
You may also connect the Wireless TV Headphones via your TV's headphone jack. Use the provided audio cable and connect the base of the
speaker to your TV as shown below.
NOTE: In most cases, the TV speaker's volume will be muted when using this type of connection.
For TV's with Audio-Out Ports (RCA type)
If the back of your TV has audio-output RCA-type ports, it is an analog-output setup. Use the provided audio cable and connect the base of
the Wireless TV Speaker to your TV as shown below.
NOTE: In most cases, TV speakers are not muted with this type of connection.
FOR TV'S WITH DIGITAL OUTPUT PORTS ( OPTICAL )
If your TV has digital optical audio output ports, use the included optical cable. Connect it to the base of your Wireless TV Speaker as shown
below. In most cases, TV speakers are not muted with this type of connection.
NOTE: Newer TVs have the option to set digital audio output to either Dolby or PCM. The Wireless TV Speaker only works with a PCM audio
format. Simply set your TV to PCM digital output. Contact your TV manufacturer for assistance if necessary.
AUDIO CONNECTION EXPANSION ( FOR ANALOG OUTPUTS )
If your TV or satellite/cable box analog output ports have been used with other audio devices, the Wireless TV Speaker can be connected to
your TV or satellite/cable box by using the provided RCA Y-Adapter Cables. (There are 2 cables with color-coded connector ends to match
the UR audio output connectors.) Connect the Wireless TV Speaker as shown below.
- 5 -