Vortran GO2VENT 6123 User Manual page 8

VORTRAN ® Medical
III. Protocol: Setup Instructions - GO
4.3 HAZARDS/PRECAUTIONS
4.3.1 The GO
4.3.2 Do not use grease or oil on the GO
4.3.3 Do not use the GO
4.3.4 Do not smoke while using the GO
4.3.5 Do not dismantle or attempt to remove any components other
4.4 SET-UP INSTRUCTIONS
4.4.1 The GO
4.4.2 Select desired FiO2 delivery.
VORTRAN ® GO 2 VENT™ User's Guide
VENT™ should be used only by individuals who have
2
adequate training in CPR techniques and the operation of gas-
powered resuscitators.
or near open flames.
equipment.
than those required for routine operations. Any tampering with
the GO VENT™ may cause the unit to malfunction, and will
2
automatically void the warranty.
VENT™ is suitable for patients weighing 22 pounds or
2
10 kilograms.
[a] If 100% FiO is
2
to be delivered to
the patient, connect
tubing to the white
gas connector with
the DISS thread
connection on the
patient tee. Ensure
that the green knob
is turned clockwise
until it comes to a
stop.
100%
Page 8
VENT™ (continued)
2
VENT™ for any reason.
2
VENT™™ in oxygen deficient atmospheres
2
VENT™ or any other oxygen
2
[b] If 50% FiO2 is
to be delivered to
the patient,
connect tubing to
the white gas
connector with the
DISS thread
connection on the
patient tee. Ensure
that the green knob
is turned
counterclockwise
until it comes to a
stop.
50%
5/26/2017
ENTRAINED
FLOWCHART