Go 2 Vent™ Competency - Vortran GO2VENT 6123 User Manual

VORTRAN ® Medical
V. GO VENT™ COMPETENCY
2
How to set up your ventilator dependent patient using the GO
automatic disposable ventilator that operates with compressed gas.
1. To be able to set up the GO
a. Setting the required flow for FiO
b. Getting the PIP and PEEP from the manometer
c. Adjusting the respiratory rate
d. For non-breathing and spontaneous breathing patient
2. 2. To be able to troubleshoot and correct any problem that may arise with
the use of the GO
a. Gas consumption during use
b. What is happening if it stops cycling while adjusting the rate dial
1. I can set a constant respiratory rate and tidal volume with the GO
2. With the GO
and volumes being delivered to your patient.
After completion of the GO
up the GO VENT™and troubleshoot problems that may arise with its use.
2
Name:
Department:
VORTRAN ® GO 2
Objectives
VENT™.
2
VENT™.
2
Troubleshooting
[ ] True [ ] False
VENT™, compliance has a direct effect on the respiratory rate
2
[ ] True [ ] False
VENT™ competency, the practitioner should be able to set
2
VENT™ User's Guide
100% or 50%
2
Institution:
Date Completed:
Page 13
5/26/2017
VENT™, a fully
2
VENT™.
2