Download Print this page
King Canada PERFOMANCE PLUS 8530LPN Instruction Manual
King Canada PERFOMANCE PLUS 8530LPN Instruction Manual

King Canada PERFOMANCE PLUS 8530LPN Instruction Manual

8 gallon wet dry vacuum

Advertisement

Quick Links

06/2019
INStructION mANuAL
mOdeL: 8530LPN
COPYRIGHT © 2019 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.

Advertisement

loading

Summary of Contents for King Canada PERFOMANCE PLUS 8530LPN

  • Page 1 06/2019 INStructION mANuAL mOdeL: 8530LPN COPYRIGHT © 2019 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
  • Page 2: Warranty Information

    Canada service center. Contact your retailer or visit our web site at www.kingcanada.com for an updated listing of our authorized service centers. In cooperation with our authorized service center, King Canada will either repair or replace the product if any part or parts covered under this warranty which examination proves to be defective in workmanship or material during the warranty period.
  • Page 3: Important Safety Instructions

    ImPOrtANt SAFety INStructIONS reAd ANd uNderStANd ALL INStructIONS BeFOre flow. uSING tHIS vAcuum. Read and understand this operator’s manual • Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. and all labels on the Wet/Dry Vacuum cleaner before operating. Safety •...
  • Page 4 GettING tO KNOw yOur vAcuum, eLectrIcAL INFO & SPecIFIcAtIONS GettING tO KNOw yOur vAcuum 1) Cover/motor assembly 2) Cover latch (2) 3) Switch 4) Top carry handle 5) On-board accessory storage 6) Inlet 7) Tank 8) Tank drain cap 9)Foam filter 10) Re-usable filter 11) Cartridge filter 12) 30L Dust bag...
  • Page 5 uNPAcKING & ASSemBLING yOur vAcuum AtteNtION! the vacuum accessories are packed inside the vacuum tank. uNPAcKING yOur vAcuum remove the entire contents of the carton, please note that most of the accessories are packed inside the vacuum tank. To access these accessories, undo the 2 latches (A) Fig.3, remove the tank cover/motor assembly and then remove the accessories inside the tank.
  • Page 6: Operation

    OPerAtION dry vAcuumING OPerAtIONAL StePS Before vacuuming dry materials, it is important that you have read and understood the safety rules in this manual. 1) Unplug the power cord from the power source. 2) Remove the cover/motor assembly and install a clean and dry foam filter. If the vacuuming operation is extremely dusty, install the re-usable filter over the foam filter or only install the cartridge filter (A) Fig.9 instead of both other filters.
  • Page 7: Operation And Maintenance

    Inlet is block or tank is full- Unblock inlet or empty tank through tank drain. PArtS dIAGrAm & PArtS LIStS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.