Monitor Menu; Boot Menu - Asus PRIME Z390-A Manual

3.7
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Q-fan Configuration
Q-fan Tuning
Click this item to automatically detect the lowest speed and configure the minimum
duty cycle for each fan.
WATER PUMP+ / AIO PUMP Control
[Disabled]
[Auto]
[DC mode]
[PWM mode]
3.8
The Boot menu items allow you to change the system boot options.
Boot Configuration
Fast Boot
[Disabled]
[Enabled]
Setup Mode
[Advanced Mode]
[EZ Mode]
ASUS PRIME Z390-A
E14498_PRIME Z390-A_UM.indb 21

Monitor menu

Disable the Water Pump control feature.
Detects the type of water pump installed and automatically switches
the control modes.
Enable the Water Pump control in DC mode for 3-pin chassis fan.
Enable the Water Pump control in PWM mode for 4-pin chassis fan.

Boot menu

Allows your system to go back to its normal boot speed.
Allows your system to accelerate the boot speed.
The following items appear only when you set the Fast Boot to [Enabled].
Next Boot after AC Power Loss
[Normal Boot] Returns to normal boot on the next boot after an AC power
loss.
[Fast Boot] Accelerates the boot speed on the next boot after an AC
power loss.
This item allows you to go to Advanced Mode of the BIOS after
POST.
This item allows you to go to EZ Mode of the BIOS after POST.
3-21
8/22/2018 10:21:07