Table of Contents
Advertisement
3.6.6
This item allows you to configure the firmware TPM.
3.6.7
The items in this menu allow you to configure Thunderbolt settings.
3.6.8
The items in this menu allow you to switch between PCIe Lanes and configure onboard
devices.
HD Audio
This item allows you to enable or disable the High Definition Audio.
Configuration options: [Disabled] [Enabled]
Intel LAN Controller
This item allows you to enable or disable the Intel LAN controller.
Configuration options: [Disabled] [Enabled]
LED lighting
When system is in working state
This item allows you to turn the RGB LED lighting on or off when the system is in the
working state.
Configuration options: [On] [Off]
When system is in sleep, hibernate or soft off states
This item allows you to turn the RGB LED lighting on or off when the system is in the
sleep, hibernate or soft off states.
Configuration options: [On] [Off]
M.2_1 Configuration
[Auto]
[SATA mode]
[PCIE mode]
PCIEX16_3 Bandwidth
[X2]
[X4]
ASUS PRIME Z390-A
E14498_PRIME Z390-A_UM.indb 19
PCH-FW Configuration
Thunderbolt(TM) Configuration
Onboard Devices Configuration
Auto-detects the M.2 device mode. If a SATA device is detected,
SATA6G_2 will be disabled.
Only supports M.2 SATA devices. Please note that SATA6G_2 port cannot
be used in this mode.
Only supports M.2 PCIE devices.
Run at X2 mode with SATA6G_56 enabled.
Run at X4 mode for higher performance with SATA6G_56 disabled.
3-19
8/22/2018 10:21:07
Hide quick links:
Advertisement
Table of Contents
