Do you have a question about the Smart Alarm System and is the answer not in the manual?
Questions and answers
Tony Blackmore
January 18, 2025
Cannot connect system to WiFi
1 comments:
Mr. Anderson
February 4, 2025
To connect the Curv Smart Alarm System to WiFi:
1. Disarm the System: Start by disarming the alarm system. 2. Enter Admin Code: Type the admin code `123456` and select "Enter". 3. Access WiFi Settings: Go to the settings menu and choose "WIFI Config". 4. Start Network Setting: Select "Connecting" and press "Enter" to begin the network setup. 5. Use the App: - Open the app and choose “Add Device” → “Others” → “Wi-Fi Connector”. - Enter the password for your WiFi network (the same network the app is connected to). - Wait approximately 20 seconds for a response. 6. Set Alarm Name: Once connected, set the alarm name to complete the WiFi connection.
Need help?
Do you have a question about the Smart Alarm System and is the answer not in the manual?
Questions and answers
Cannot connect system to WiFi
To connect the Curv Smart Alarm System to WiFi:
1. Disarm the System: Start by disarming the alarm system.
2. Enter Admin Code: Type the admin code `123456` and select "Enter".
3. Access WiFi Settings: Go to the settings menu and choose "WIFI Config".
4. Start Network Setting: Select "Connecting" and press "Enter" to begin the network setup.
5. Use the App:
- Open the app and choose “Add Device” → “Others” → “Wi-Fi Connector”.
- Enter the password for your WiFi network (the same network the app is connected to).
- Wait approximately 20 seconds for a response.
6. Set Alarm Name: Once connected, set the alarm name to complete the WiFi connection.
This answer is automatically generated
How to change battery in remote control