Control By Phone Call - Curv Smart Alarm System Instructions Manual

11 Control by phone call

This function applies only if you are using the Alarm system with a
SIM card.
This function enables you to control your alarm system by phone
call. This can especially be helpful if you are located in an area
without Wi-Fi or 3G/4G coverage.
How it works
1. Call the phone number of the SIM card in the control panel.
2. The control panel picks up: type your 4-digit passcode, followed
by "#" (Default passcode: 1234).
3. A voice prompt con rms if your code is correct.
4. On your phone, dial the code corresponding to the command:
Table 1
Command
Dial
Arms the system
1
0
- Disarms the system and turns the siren o
- Stops monitoring without hanging up
Audio monitoring
*
Two-way talk
3
Turns the siren o
6
Turns the siren on
9
#
Disarms the system, turns the siren o and ends the
phone call
If your alarm is triggered
If the alarm is triggered, your control panel will immediately
inform you: