Advertisement
ABB i-bus
®
DALI Gateway, Emergency Lighting, MDRC
DGN/S 1.16.1, 2CDG 110 142 R0011
Operating and display elements
Enclosure
Safety class
Isolation category
KNX safety extra low voltage
DALI voltage
Temperature range
Environmental conditions
8
Design
Installation
Mounting position
Weight
Housing, colour
Approvals
CE mark
1)
The length relates to the common DALI control cable. The maximum values are rounded off and relate to the resistance values.
EMC influences are not considered. For this reason, the values should be considered as absolute maximum values.
2)
Both "normal" lamps as well as battery operated emergency lighting can be connected in a mixed configuration to the DGN/S 1.16.1.
However, the maximum number of DALI devices may not exceed 64.
DGN/S 1.16.1
KNX
button
button/LED
LED , green
LED , yellow
IP 20
II
overvoltage category
pollution degree
SELV 24 V DC
typical 16 V DC (9.5...22.5 V DC)
no-load voltage
lowest supply current at 11.5 V
highest supply current
operation
storage
transport
humidity
modular installation device (MDRC)
dimensions
mounting width
mounting depth
on 35 mm mounting rail
as required
0.16 kg
plastic housing, grey
KNX to EN 50 090-1, -2
in accordance with the EMC guideline and
low voltage guideline
Page 2 of 4
DGNS_1161_TD_EN_V1-0
2CDC 507 115 D0201
DALI output test
for assignment of the physical address
display for operation readiness
for displaying DALI fault, constant light
for displaying test mode, slow flashing
for displaying initialisation or more than
64 DALI devices, quick flashing
to EN 60529
to EN 61140
III to EN 60 664-1
2 to EN 60664-1
to EN 60929 and EN 62386
16 V DC
160 mA
230 mA
-5 °C...+45 °C
-25 °C...+55 °C
-25 °C...+70 °C
maximum 93 %, moisture condensation
should be excluded
modular installation device, Pro M
90 x 72 x 64.5 mm (H x W x D)
4 modules at 18 mm
68 mm
to EN 60 715
certification
DGN/S 1.16.1
8
Advertisement
