Rps Switch Hall Sensor; Hall Sensor Is Easy To Remove - GE GTWS8650DWS Training Manual

Bottom of Subwasher

RPS Switch Hall Sensor

NOTE – The outer clips could break when removing. Have one on your truck before servicing.
Inner Clip on Stator

Hall Sensor is Easy to Remove

Without Removing or Replacing
the Complete Stator Assembly.
 Remove the 11/16" Rotor Nut
and Pull Rotor off to Access
the Stator Assembly
 Unclip Hall Sensor from Stator
by Lifting up from the Outer
Edge Releasing the outer clips.
 Inner clip will follow.
 Unplug Connector Located on
the Center of the Hall Sensor