GE GTWS8650DWS Training Manual page 73

Bottom of Subwasher
Platform Assembly Installation
3
1
4
2
Install the platform starting
with the inner bolts first.
They are numbered 1,2,3
and 4. Start with number 1
first.
Start the bolts but do not
tighten all the way in right
away. Tighten each bolt ¼ of
the way in at a time. This is
done to pull the pressed on
seal into the tub assembly
evenly.
Once the inner bolts are all
pulled in, the outer bolts
may then be installed.
Tighten and torque to 65
inch lbs.