Advertisement
2. Plug in the DVD player and press the 'Power' button to turn
the unit on. You can do this on the unit or via the remote
(Rem.1).
When the machine is switched on, pressing the POWER button
on the remote control will make it go into standby mode. Press
the button again and the machine will switch on.
WARNING: If the product is not going to be used for a long
period of time, it is advisable to unplug it for safety
3. Press the Open/Close button on the front panel or on
the remote control (Rem.20) and place a DVD disc on the disc
tray. Press the Open/Close button again to close the tray.
4. The DVD will read the DVD disc and begin play. You can
control the playback and settings via the buttons of the remote
control.
USB Operation
This product has a USB port on the front panel for MP3/
Movies playback.
Insert a USB into the USB port on the front panel of the DVD
player.
Press the DVD/USB button on the remote control (Rem.4) to
enter the USB source. The DVD player will read and display the
25, 28
button (
Rem.26
The Max capacity for USB device can not exceed 16GB.
) of the remote control.
Rem.
buttons (
7, 24,
9
Advertisement
