Power Supply; Com Ports - Delta Electronics DVP-MC Series Instruction Sheet

CALL NOW 800-985-6929
 Electrical Specifications
 Power Supply
Power supply voltage
Power supply fuse
Insulation voltage
Power consumption
Shock/vibration
immunity
Noise immunity
Ambiance
Weight
 I/O Specifications
I/O channels
I/O channel types
I/O terminals
Common terminal for
input points
Input types
I/O delay time
Input signal current
Max. I/O cable length
Power supply for
output points
Max. load
#1: UP and ZP must use external auxiliary 24 VDC power supply (-15 to 20%).
 COM Ports
 COM1 (RS-232)
DVP10MC11T offers one RS-232 port. See the table below for the PIN definitions.
PIN
1, 2
3
4
5
6
7
8
CALL NOW 800-985-6929
24 VDC (-15 to +20%)
3 A/30 VDC, Polyswitch
500 VDC (Secondary-PE)
8 W Max.
Standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/IEC61131-2 & IEC
68-2-27 (TEST Ea)
ESD (IEC 61131-2, IEC 61000-4-2): 8 kV Air Discharge
EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2 kV, Digital I/O: 1
kV, Analog & Communication I/O: 1 kV
Damped-Oscillatory Wave: Power Line: 1 kV, Digital I/O: 1 kV
RS (IEC 61131-2, IEC 61000-4-3): 26 MHz ~ 1GHz, 10 V/m
Operation: 0 to 55°C (temperature), 50 to 95% (humidity), pollution
degree 2
Storage: -25 to 70°C (temperature), 5 to 95% (humidity)
Approx. 240g
8 input channels, 4 output channels
8 high-speed digital input channels, 4 high-speed digital output
channels
Input terminals: I0, I1, I2, I3, I4, I5, I6, I7
Output terminals: Q0, Q1, Q2, Q3
Wiring terminal S/S (for connecting to the positive or negative pole of
the power supply)
Sink or Source
Input: 2.5 µs (OFFON), 5 µs (ONOFF)
Output: 2 µs (OFFON), 3 µs (ONOFF)
24 VDC, 5 mA
Shielded: 500m; Not shielded: 300m
24 VDC (-15 to +20%)
Resistive load: 0.5 A/1 point (2A/ZP)
Conductive load: 13 W (30 VDC)
Light bulb load: 2.5 W (30 VDC)
Signal
+5V 5V power supply (positive pole)
GND
Rx
Tx
GND
NC
GND
Email: charles@automatedpt.com
#1
Definition
Earth
Receiving data
Sending data
Earth
Reserved
Earth
Email: charles@automatedpt.com
- 2 -