Table of Contents
Advertisement
RADIO / SOUND / DISPLAY
7. AUTO TRAVEL PRESET (AUT,
Press the AUT button within 1.5 seconds, you can
change the radio mode to the AUT function that
operates all over the radio band. The display will
show you the message "AUT". To return, press
the AUT button within 1.5 seconds again.
Press the AUT button for more than 1.5 seconds it
starts to search for the 10 strongest FM or AM stations of the
region where you are driving to be stored. To return to the stations
you manually set, press the band button lightly.
8. Super-BASS (SUP-B, LOC,
Press this button to select boosting the bass
sound or normal sound. The message "S-BASS"
appears on the display while you enjoy the BASS
boost. To cancel, press this button again.
LOCAL STATION (LOC,
)
When pressed this button for more than
1.5seconds, it displays the message "LOC". This is used to
change the tuning stop level during search. The LOCAL mode is
established when the button is pressed to its ON position. At this
position, stations with weak transmissions signals are skipped.
This function makes it possible to scan quickly all those stations
with stable reception. Press the button once more than 2 seconds
again to its OFF position to scan stations with weak signals.
9. MUTE ( )
Press this button to mute the sound temporarily. To cancel the
mute mode, press this button again.
)
10. EQ ( )
Press the EQ button and than, rotate volume to
select from the different sound effects of Pop,
Rock, Classic and Flat. Adjust the level of Treble
and Bass in EQ-User's mode only.
11. SCAN (SCAN,
When this switch is pressed during broadcast reception, scan
tuning will start, stations are tuned in automatically and held 5
seconds, after which scanning resumes until the next station is
located. Pressing this switch again will stop scan tuning.
)
12. DISPLAY CONTROL (DSP,
When pressed belower than 1.5 seconds.
(1) In Radio Mode
(2) In TAPE Mode
During clock displayed
Press the DSP button and simulta-
neously turn the Tune button to
adjust clock.
(T-UP : Minutes, T-DN: Hour)
9
)
)
present clock is displayed.
another key is not pressed during 5 seconds, it
is changed priority display states.
FREQ
(CLK)
TAPE
FREQ
(CLK)
Hour
Minute
Advertisement
Table of Contents
