b. Remove the M.2 solid-state drive.
c. Install the M.2 solid-state drive.
d. Insert the stopper.
5. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
M.2 solid-state drive bracket
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 61.
2. Remove the front bezel. See "Front bezel" on page 62.
3. Remove the drive bay assembly. See "Drive bay assembly" on page 65.
4. Remove the M.2 solid-state drive. See "M.2 solid-state drive" on page 75.
.
Chapter 6
Hardware removal and installation
77