Circuit Diagram; Wiring Diagram - Makita DCL140 Technical Information

C
ircuit diagram
Fig. D-1
COM
NO
Switch
Red (200mm)
Terminal
AS
W
iring diagram
[1] Wiring of Motor Assembly
Fig. D-2
Connect white Lead wires to the plus terminal of Motor assembly (the terminal indicated by a red marking).
Connect blue Lead wires to the other terminal (the minus terminal) of Motor assembly.
Then assemble Motor section to Housing (L) with the plus terminal of Motor assembly on Switch side (top side).
Note: Make sure that the wire connecting portion of each receptacle is positioned on Housing (L) side.
= Wire connecting portion
of Receptacle
red marking indicating plus pole
Housing (L) side
Controller unit
Black (150mm)
Line filter (if used)
Receptacle
Orange (100mm)
Yellow (130mm)
White (130mm)
Blue (130mm)
Red marking
Motor assembly
DC Motor
Housing (R) side
P 8/ 9