Polaris Ranger 500 2x4 2007 Service Manual page 68

9. Disconnect exhaust from the engine.
10. Remove airbox.
11. Remove oil and coolant lines.
NOTE: Drain and dispose of the fluids properly.
12. Remove all engine mount nuts and / or engine mount plates.
Carb Model shown below.
Top Motor
Mounts
Rear
Motor
Mount
Top / Rear Engine
Mount
Carb
Bottom Mount
13. Carefully remove engine through top of seat frame. Lift the
engine from bottom mounts and then lift the engine from
rear mounts.
NOTE: Use caution when lifting the engine out of
frame. Use an engine lift or other means, if the
engine appears too heavy to be lifted manually.
ENGINE
3
3.9