Page 1
STAND CHARGING STATION ASSEMBLY INSTRUCTIONS READY Before assembling your Printer stand, please read through these ASSEMBLE instructions carefully and familiarize yourself with the different parts. Hexagon Wrench Adult Assembly NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE HEXAGON NUT, WASHER, WOODEN DOWEL, OR WOOD SCREW ARE DAMAGED DURING ASSEMBLY.
Page 2
STEP 1 Attach the legs (02) to the top panel (01) using flat washers (A) and hexagon nuts (B), tighten with hexagon wrench (C), as shown below. Adult Assembly STEP 2 STEP 3 Attach first side panel (03) to printer stand aligning Install wooden dowels (D) and (E) into the locator the dowels (D) with the holes in the apron.
Page 3
STEP 4 Attach second side panel (03) the same as the first but place the lower shelf (04) in position by aligning the wooden dowels (E) with the holes in the side panel. Adult Assembly STEP 5 Apply presure to eliminate any gap between the lower shelf and the side panel and fix in place using wood screw (F).