Page 1
READY PRINTER STAND TOP PANEL ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS Before assembling your Printer stand, please read through these instructions carefully, familiarising yourself with the different parts. Hexagon Wrench Assembling by Adult HARDWARE IN LEG CARTON Flat washer - 8 pcs PRINTER STAND SHOWN WITH SQUARE LEG PRINTER STAND SHOWN WITH SQUARE LEG Hexagon nut - 8 pcs...
Page 2
STEP 1 Attach the legs (02) to the top panel (01) as shown below using flat washers (A) and hexagon nuts (B), tighten with hexagon wrench (C). Congratulations ! Your Printer stand is now ready for use. We recommend that you recheck that all screws are tightened, and that all parts are secure before use and periodically to ensure safety.