Safety Instructions - VOLTCRAFT V-CHARGE ECO NIMH 1000 Operating Instructions Manual

Operating instructions
Charger "V-CHARGE ECO NIMH 1000"
Item no. 1460625
Intended use
The charger is designed to charge NiMH/NiCd batteries with 1 - 8 cells (nominal voltage
1,2 to 9,6 V). Observe the instructions on charging current, charging capacity, as well as the
instructions in chapter "Technical Data" at the end of this operating instructions.
The charger has a built-in power supply unit (operating voltage 100 - 240 V/AC, 50/60 Hz);
connect the charger to an appropriate mains socket for voltage/power supply via the supplied
power cable.
For safety and approval reasons, you may not convert and/or alter the product. If you use the
product for purposes other than those described above, the product may be damaged. Moreo-
ver, the improper use involves risks such as short-circuits, fire, electric shocks, etc. Please read
the operating instructions carefully and do not discard them. If you pass the product on to a third
party, please hand over these operating instructions as well.
This product complies with the applicable National and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package Contents
• Charger
• Power cable
• Operating Instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of Symbols
The lightning symbol inside a triangle is used when there is a potential risk of perso-
nal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating
manual which absolutely have to be observed.
The arrow symbol is used when specific tips and information on handling sare pro-
vided.
The product is designed according to protection Class II (reinforced or double insu-
lation, protective insulation).
Observe the operating instructions!

Safety Instructions

Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for injuries/material
damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper handling of
the product. Furthermore, in such cases, the warranty/guarantee will be null
and void.
Dear Customer, the following safety instruction is intended not only for the protection
of your health, but also for the protection of the product.
Therefore, please read the following points very carefully before connecting and
using the product for the first time.
a) General Information
• Unauthorised conversion and/or modification of the product is not allowed for sa-
fety and approval reasons. Never dismantle the product.
• Maintenance, settings work or repairs may only be carried out by a specialist/
specialised workshop.
There are no components for you to adjust or maintain within the device.
• The product is not a toy and should be kept out of the reach of children! The
product may only be set up, used or stored in places that are not accessible to
children. The same applies to rechargeable batteries. Children could short-circuit
the rechargeable battery/battery pack, which may cause an explosion. This pre-
sents a danger to life!
• The construction of the product corresponds to the protection-class II (double or
reinforced isolation). Pay attention that the insulation (of the casing or the output
cable) is neither damaged nor destroyed.
• The charger is designed to be operated with a mains socket with supply voltage of
100 - 240 V/AC, 50/60 Hz. Never operate it on a different voltage.
• The outlet must be located in direct proximity to the device and easily accessible.
• Do not pull the mains plug from the mains socket by pulling on the cable!
• In schools, educational centres, hobby and self-help workshops, the operation of
the product must be supervised by trained employees.
• On industrial sites, the accident prevention regulations of the association of the
industrial workers' society for electrical equipment and utilities must be followed.
• Do not leave the packaging materials unattended. It may become a dangerous
plaything for children!
• If in doubt about how to connect the device correctly, or should any questions arise
that are not answered in these operating instructions, please contact our technical
service or another specialist.
b) Location for Use
• The product may only be used in dry, enclosed spaces. It may not get wet or
damp; otherwise there may be danger of electric shock!
Do not use the charger within a vehicle.
• Select a stable, flat, clean, sufficiently large place for the charger.
Do not place the charger on a flammable surface (e.g. carpet, tablecloth). Always
use a suitable, non-flammable, heatproof base.
Do not place the charger on surface of valuable furniture without suitable protec-
tion. The impact of heat could lead to colour or material changes.
Keep the charger away from easily flammable materials (e.g. drapes, paper), li-
quids (e.g. gasoline) or gases.
• Avoid direct sunlight, strong heat or cold. Keep the charger away from dust and
dirt.
• Do not use in the immediate vicinity of strong magnetic or electromagnetic fields,
transmitter aerials or HF generators. This can impact the electric control system.
• Do not place any containers filled with liquid, e.g. vases or plants, on or next to
the charger.
If these liquids get into the interior of the charger, the charger will be destroyed,
and there is also the greatest danger of a fire or an explosion.
In this case, immediately switch off at all poles the mains socket that the charger
is connected to (switch off the corresponding circuit breakers or remove the safety
fuse, then switch off the corresponding earth leakage circuit breaker).
Afterwards, remove the battery from the charger and pull the power plug out of
the mains socket.
Let the battery and the charger dry, then have them checked by a specialist work-
shop or dispose of them in an environmentally compatible manner.
• Make sure that the power cable is not pinched or damaged by sharp edges. A
damaged power cable must not be used! Place the cable so that nobody can trip
over it.
c) Operation
• Only NiCd or NiMH batteries or battery packs with 1 to 8 cells (nominal voltage
1,2 to 9,6 V) can be charged with this charger.
Never charge other types of rechargeable batteries (for e.g. LiPo or lead batteries)
or non-rechargeable batteries. There is a great risk of fire or explosion!
• Maintain enough distance to flammable objects. Allow enough distance between
the charger and the battery (minimum 20 cm); never place the battery on the
charger.
• As both the charger and the battery heat up during the charge/discharge proce-
dure, it is necessary to ensure sufficient ventilation. Never cover the charger and/
or the connected battery.
• Do not operate the appliance when it is unattended. Although there is a wide range
of comprehensive safety mechanisms on the device, it is impossible to exclude the
possibility of malfunctions or problems occurring while charging a battery.
• When you work with the charger or rechargeable batteries, never wear metallic
or strongly conductive materials, such as jewellery (necklaces, bracelets, rings
or similar objects). A short circuit at the battery or charger poses a danger of fire
and explosion.