Table of Contents
Advertisement
WARNINGS:
Green blink on Warning lights (Arm-lock is
enabled, meaning the drone will not arm unless it
has GPS lock *this is the default configuration*)
Red blink on Warning lights (Battery is low
*3.5V is the default warning cell voltage*)
28
RubiQ
FIELD NOTES
Blue blink on Warning lights (Critical hardware
malfunction)
NOTE: The default warning cell voltage is to set 3.5V
to account for the dip that can occur when the drone
draws heavily on the battery during flight. When RubiQ
lands and you plug the battery in to recharge, you
may notice that the cells show a voltage higher than
3.5V. This is ideal for the overall life of your LiPo's,
since discharging below 3.8V per cell (11.4V total for
Rubi's 3S batteries) may damage the battery. Since the
warning cell voltage is set for flight conditions, use
INAV to keep an eye on the voltage when working on
the bench. Recharge batteries as soon as their cells hit
3.8V (11.4 V total) to maximize their total life.
© 2020 PCS Edventures, Inc.
Hide quick links:
Advertisement
Table of Contents
