PCS edventures RubiQ Flight Manual page 18

POST-BUILD INSPECTIONS
Make sure black camera cable is connected to inner GND pin. (see Step 2)
FIRE RISK
Make sure camera cables exit from the top of camera, close to PCB. (see Step 2)
CAUTION
Make sure arms with CCW (red) and CW (black) cables are installed with matching colors diagonal
CAUTION
from each other. (see Step 3)
Make sure the VTX is properly installed so that none of the pins are exposed. (see Step 5)
CAUTION
Make sure the VTX antenna base has been securely fastened with a wrench. (see Step 5)
CAUTION
Make sure black motor cables are connected to GND connectors. (see Step 7)
FIRE RISK
Make sure black ESC cables are connected to GND pins. (see Step 7)
FIRE RISK
Make sure hole in battery plate is directly above the receiver (RX). (see Step 8)
CAUTION
Always remove props before connecting the battery while indoors.
CAUTION
Always wear safety glasses when connecting battery.
CAUTION
16 RubiQ
FLIGHT MANUAL © 2020 PCS Edventures, Inc.