Advertisement
5)
Once both the weight plate and arm are securely fastened, it is safe to re-insert the
robot battery and power on the unit. The fully set up robot should look like the model
depicted above. Time to start using your Manipulator Arm!
NOTE: In addition to securing the rear weight plate, it is highly recommended that
you keep the front flippers flat on the ground while operating the arm. Doing so will greatly
increase the robot's stability and improve the smoothness of robot movement. After
powering the robot up and before using the arm, make sure the front flippers are flat on
the ground.
6
Avatar® Manipulator Arm User Manual
12/2012
Advertisement
Need help?
Do you have a question about the Avatar II and is the answer not in the manual?
Questions and answers