Advertisement
1~10V DIMMING WIRING INSTRUCTION
DB series of high bay fixtures come standard with 1-10V dimming interface. The dimming is
controlled by 1~10VDC dimming signal (to be provided by other devices).
An 8 to 10V DC signal will have about 100% lumen output.
A 0 to 1V DC signal will have about 10% lumen output.
1. Pull out the Dimming Cable that was secured by a wire grip when shipped. The dimming
cable can be identified by the marking on the driver (power supply).
2. Remove appropriate length of the dimming cable jacket and cut off the Black/ White (Vaux)
wire if not using the 12V auxiliary power feature.
Wire the dimming cables electrical connection. Follow the wire color code per marking on
the driver. Violet (or Blue in selected models) wire connects to Dimming +; Gray (or White in
selected models) wire connects to Dimming -;
Jacket
LED Driver
Black/White (Vaux)
+
Violet (Blue) (Dim+)
Gray (White) (Dim-)
-
12V
8
Black/White (Vaux)
Violet (Blue) (Dim+)
Gray (White) (Dim-)
Dimmer
Advertisement
