Advertisement
WALL MOUNT INSTALLATION
1. To pre-assembled bracket and luminarie .Use screw and washer to fix the luminaire on the
structure. Suggest to use 3/8" (M10) Screw and T 2.0 min washer.
bracket
2. Loosen the M10 and M4 screw, and tilt the luminaire to the determinded direction.
If determinded, fixed the Screw
M10
M4
3. Connect power cable conductors as follows:
Green wire connects to Safety Ground.
White wire connects to Neutral
Black wire connects to Live
Torque Suggestion:
M10: 18 ft-lbs (245 Kgf.cm)
M4: 1 ft-lbs (14 Kgf.cm
5
Advertisement
